FIX: Replace Backlight Module for Water Damaged iPhone

As we know, when cell phone dropping into water that mean backlight module will be damaged, so the screen will abnormally. You don't know how to fix it？ vipprogrammer  will offer a solution forbacklight module damaged absicission.

Step1: As for those iPhones whose backlight module is damaged after water gets in, replacing screen assembly can settle the problem but that will cost too much. Customers will find it hard to accept it. If you can master the way to replace the backlight module, you can save much from for you customers. it tools and assistance materials are 530 cleanser, non-dust cloth, backlight module, Electric Soldering Iron and pre-heater platform, as shown in the picture.

Step2: First use electric Soldering iron to burn out the backlight module power supply circuit, as shown in picture.

Step3: Set preheater to 80℃ to soften the glue around the backlight module so that it is easy to separate them.

Step4: Use non-dust cloth to dip 530 cleanser to clean the dust and remaining glue on screen. During the clean process, we have to make sure there is not any dust and remarks left, or that will affect the displays effect.

Step5: After the cleaning, tear off the transparent dustproof membrane on the new backlight module and stick it on the back of screen, as shown in picture.

At last, solder the power supply of backlight module and stick insulation label, as shown in picture.

Tips: If you’d like to know more about the preferential iphone repair tool maintenance please read on www.vipprogrammer.com.