Share Phone Repair Guide and Provide Phone Repair Tools

A damaged iPhone 7 Plus need to be repaired, the fault described is that the iPhone 7 Plus won't turn on. First we need to connect it to DC power supply with iPhone lightning cable to test the iPhone charging current, the current jumps around 200mA, not stable. The computer can't identify the iPhone when it is connected, and it doesn't boot.  Nest we need to disassemble iPhone to detect. Use phone opening tools to tear down the iPhone, and then remove the iPhone motherboard. Measure the iPhone motherboard with Fluke 15B+ Digital Multimeter , there is no current, which means no leakage. Trigger it and it shows large current, the current up to 1.9A. Now, apply some rosin on iPhone logic board, and then use QUICK 861DW hot air rework station to heat it, it's turning white. Picture 17-8-1 It's frustrating to see this, did the iPhone main power break down? Open the WUXINJI Dongle to check iPhone bitmap, we found the iPhone Nand flash power also was i...

we know that this situation will cause many important mobile activities will be interfered, whether FaceTime chat, voice chat or recording Video, no sound. This is a very annoying problem, and now VIP Pro Shop Team will tell you how to get rid of it. You can Try the following solutions: 1.Test the microphone:  You need to make sure the problem, try recording your voice through the sound recorder and verify if the working condition is fine or not. If needed, check the volume level of your iPhone and keep adjusting it. 2.Using Voice Memos:  Open Voice Memos app that you can find on Home screen . Make sure your fingers aren't covering the microphone. Tap the record icon and start speaking. Now, playback the recording voice. Make sure you can hear your own recording voice clearly. 3.Cleaning the microphone hole:  You need clean the microphone hole and speakers hole. You must gentle to avoid damage the phone. 4.Remove iPhone c...

Where can I get a user manual? Fortunately, you can get answers here. To be exact, NAVIPLUS PRO3000S is one of the best Nand test fixtures, and here we’ll share some of our e-Guide NAVIPLUS PRO3000S and iphone ipad without removing adapters. 1. NAVIPLUS PRO3000S Nand Flash Programmer First, supply power on it, and then insert the small socket. Second, put iPhone Nand flash on it (please put the good NAND flash and right position) Then touch the screen with a pointy thing, such as the tweezers, but you need to cover the tip of the tweezers with a lid or duct tape, in order to protect the pro 3000s touch screen. Next, choose the function you want, such as flash Nand flash, read or re-write Nand flash, repairing iTunes error, expending iPhone Nand flash and so on. If you feel that the touch is not very sensitive, then please click “Calibrate” to correct it, click on the dots on the screen, repeat this operation several times, and then quit and restart the P...

iPhone 7 starts up with a black screen or no display, yet the boot current is normal. Screen replacing also cannot solve the problem. We can draw the conclusion that the logic board backlight circuit broke down.today, the VIP Pro Shop Team will offers a logic board solution regarding the iPhone 7 black screen issue. What's iPhone 7 backlight failure? Such as the iPhone touch screen no display, the screen light is very dim or cannot adjust brightness and so on. Here we can fix iPhone 7 backlight failures.  First of all, please connect WUXINJI Dongle to your computer, and then open it to check iPhone 7 backlight power supply schematic diagram.  According to iPhone schematic diagram, we know that the iPhone backlight boost IC   output three sets of backlight power supply signals, they were PP_LCM_BLANODE (16.5V Cathode Voltage), PP_LCM_BL_CAT1 and PP_LCM_BL_CAT2, these three circuit signals are sent to the display interface via three inductors respectiv...