Repair iPad 4 won't turn on problem - HERE!

iPad 4 often can't open, most people will encounter this problem, but don't be discouraged. You can solve this mistake with a small amount of time and money. Compared to the iPhone, the iPad's malfunction is easier to solve. There are many reasons why the iPad can't be opened. In this article, the vip store team will tell us the best way to solve this problem.

We received an iPad 4, the faulty described is that the iPad LCD screen is half right and half black after iPad screen replacement, after repair the iPad motherboard by the iPad owner, the iPad won't turn on. 

According to description of the iPad user, we know that the iPad display screen has been replaced, and because the iPad is not turn off the power when replace the screen, so it causes the iPad LCD screen to be half brighter and half black. And then the iPad user try to fix it by repair the iPad motherboard, but failed, and damaged the capacitor, as a result, the iPad won't turn on anymore. 

First connect iPad to the DC power supply to check the current, we found the iPad is short circuit 3A. 

Remove the iPad motherboard to observe, we found the inductor L2210 and L2200 and the one side of an inductor is connected by tin.

Clean it up, and then measure is again, now the iPad is not short circuit. Check iPad schematic diagram through by WUXINJI Dongle, we found these 2 inductors are backlight fuse inductor. 

We can short connect these inductors by jumper wire, after short connection, install the iPad and test it.

Now the iPad displays normally, after entering the IOS system, all functions tested are normal, the repairs end!

Tips: If you need more phone repair cases, you can check out www.vipprogrammer.com