Practical Tips for Fix iPhone 7 microphone issue

The iPhone 7 did not respond to the microphone. Such as Siri can't hear you, voice message function doesn't work, audio is very low and jumbled, static sound or audio cut offs during phone calls, etc. Also, there are many reasons for these, such as IOS update, replace the new iPhone screen, etc. Anyway, whether or not your iPhone 7 has experienced this problem, you should know these practical tips.





You can try the following practical skills:

1. Check the iPhone sensor cable

Some iPhone 7 microphone problems are caused by improper installation of sensor cables, especially if the iPhone 7 screen has been replaced. In this case, you need to remove the Plate and Ear Speaker with phone opening tools, and then reinstall the iPhone Flex Cable, assemble the Ear Speaker and Plate. Finally, test your iPhone.

2. Test the microphone

If you are unsure whether the microphone is working properly, you can run some simple tests. Try to open Voice Memos app then tap the Record icon, speak into the microphone to record your voice, play back the recording by tapping the Play icon, or you can test microphone with Siri.

3. Take out the casing or accessories

Sometimes, the third-party accessories can affects the microphone, try to remove them from your iPhone and then test the microphone to see the difference on the sound quality with and without them. In the same time, please try to clean the microphone hole.


4. Reboot the iPhone

As we know, many iPhone problems can be solved by rebooting. When using the iPhone's microphone system, minor software glitches can also cause associated audio symptoms, this is usually corrected by performing a reboot on the device.

Press and hold the Sleep/Wake iphone 7 button for a few seconds until the slider shows up.

Drag the slider to power off your iPhone completely.

After about 30 seconds, press and hold the Sleep/Wake button again until the Apple logo appears. Your iPhone will then reboot.

5. Update IOS

The IOS update can solve this problem, especially if it is triggered by a software error. Apple often solves any existing bugs that affect any IOS device by updating IOS.

To check the available IOS updates on iPhone 7, go to the Setup-> General-> Software update.

6. Make audio setting is right

If a microphone problem occurs when an app is being used, it may be a cause within that application. This may be that the application has some permission that need to be configured to access the microphone. Go to the settings-> privacy-> microphone, you can check it.

7. Restore factory settings

When the above tips cannot solve this problem, then you can try to restore your iPhone to factory setting. This method will erase everything on the iPhone, so please back up you iPhone before you do this step. Go to Setting-> General-> Reset-> Erase All Contents and Settings.

If all of above tips not working for your iPhone microphone problems, then you can send it to Apple (if your iPhone is still under warranty ), or you can send it professional phone repair shop, they will use professional phone repair tools and skills to solve this problem.



Tips: More iPhone Repair free Skill or other Mobile Phone Repair details, you want to consult, You can consult Here!

Comments

Post a Comment

Popular posts from this blog

2021 Latest MagicAWRT Adapter Restore Tool for Apple Watch

Image
 Here we have the latest MagicAWRT adapter Apple Watch restore tool in 2021, and MagicAWRT offers its complete solutions to fix many apple watch problems. MagicAWRT Adapter is intended for solving service problems with Apple Watch S0/SE/S1/S2/S3/S4/S5/S6 (38 mm / 42 mm / 40 mm / 44 mm). It can solve problems such as white apples, exclamation points, restarts, stuck on screens, poor touch, ID lock, etc. It also can fix related issues that are caused by  Apple Watch glass digitizer touch replacement. Apple Watch Firmware for MagicAWRT Adapter Restore Tool will not be provided, and the customer needs to download themselves. 1. Using MagicAWRT Adapter to reset Apple Watch Data with or without Backup MagicAWRT Recovery Adapter Restore Tool is the best iOS data restore software in the market because of its ease of use and attractive user interface. Most Apple Watch users data losses are due to accidents, failed jailbreaks, hardware and software failures, factory resets, and theft. It would
Read more

My iPhone Got Wet! How To Fix iPhone Water Damage?

Image
 Water damage tends to worsen with time, and it is among the more challenging DIY repairs to undertake, so this guide covers the basic iPhone repair of water damage.  1. Remove iPhone from the water and Turn it off Remove your iPhone from the water as soon as safely possible. Minimize the length of time the iPhone and water are in contact to minimize corrosion. If your phone is still on when removed from the water, attempt to turn it off. If it's off, do not attempt to turn it on. 2. Check External Ports Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a  Anti Static Brush , or replaced if cleaning is not practical. Pay special attention to cable ends, battery contacts, connectors, pins, and fuses, as these parts are prone to corrosion and can easily cause the phone to malfunction. Test all the buttons and features (such as the microphone, s
Read more

Free download: Ford / Mazda odometer correction tool software

Image
New Mazda OBD2 Tool is the Digital Odometers, Airbag reset and immobilizer programming cables by OBD2, it is a newly OBD2 device for Mazda Vehicle. Mazda OBD2 Tool is Mazda OBD2 Odometer correct and Airbag module repair tool, especially for Mazda vehicle from 2005-2015.It is OBD2 user friendly tool, used for calibrate odometer and airbag repair. For Mazda Digital Odometers programming and Airbag reseting Tool by OBD2 Mazda OBD Tool is used to calibrate the instrument for all CAN-bus Mazda cars from 2005 to 2015 including MADZA 3/ MADZA 6 / MADZA CX5 / MADZA CX7, as well as reset the airbag/SRS for Mazda with XC236X chip. 2017 New Ford / Mazda OBD2 Tool is the Car Digital Odometers and immobilizer programming cables, and Ford OBD2 Tool and Mazda OBD2 Tool is used to mainly perform Ford / Mazda Digital Odometers, instrument calibration and immobilizer key matching. Here, VIP Pro Shop Team will share the software download link for Ford OBD2 Tool and Mazda OBD2 Tool.
Read more