Free Solution For iPhone 6 Weak Wifi Signal Repair

Many users have seen weak Wi-Fi on iPhone 6, Such as... Dropping or replacing the screen can cause the Wi-Fi signal to weaken, Some users even got a greyed-out icon or no signal shown on their device. Restart iPhone can be the first choice to fix iPhone 6 weak Wi-Fi signal issue, but will fail to work in most cases. The reason for this error is usually due to bad network or system problem, Now, VIP Pro Shop Team will share some tips and tricks to boost your iPhone.

Fault Phenomenon:  You have an iPhone 6 where the wifi signal is very weak.  It works when you are close to the router, but as you get further away, the signal goes away.

Solution 1: Reset Network Settings

In most cases, iPhone poor Wi-Fi connection is caused by the network issue, reset the network to factory settings will solve this issue, and this is also a solution suggested by Apple Service.

Go to Setting->General->Reset->Reset Network Settings.

Solution 2: Fix iPhone 6 Keeps Dropping Wi-Fi Connection Via Factory Reset

Restore iPhone to factory settings can be a fix for many iPhone problems. It will setup your device as a totally new one, but will also erase all the data. If you don’t see any data loss, Here’s how to perform a factory restore:

Go to Settings -> General -> Reset -> Erase all Content and Settings -> Erase iPhone

erase iphone

Solution 3: Check to make sure that the wifi antenna did not come lose. 

This wifi antenna sits on the back top of the logic board.  You’ll need to disassemble the logic boardbefore you can access this part.

If all is good, then here’s where the microsoldering comes into play.  There is a tiny resistor near the wifi connector that goes bad.

Replace this tiny resistor first.  If that doesn’t work, then replace the black chip next to it.   That should fix your weak wifi signal problem.

Tips: If you want us to help, then feel free to Asking about VIP Pro Shop and we’ll back to you right away.