How to Solve Weak iPhone 6P WiFi Signal - See Here!

Received a iPhone 6 plus motherboard from one of our customers, according to his description, the weak WiFi signal is the main problem. How to fix it with the best solution? Picture 10-4-1



Repair process: 

Step 1. Install the iPhone 6P motherboard to test WiFi signal. Obviously, It's weaker than a normal mobile phone. Picture 10-4-2



Step 2. Remove the motherboard to check, the WiFi connector circuit is not damaged, in many cases, most of repairmen would directly replace the iPhone WiFi IC if WiFi itself gets damaged. 

Step 3. Since we have advanced equipment with VGA 7-45X Trinocular Stereo Microscope to do careful observation, the motherboard is very beautiful, there is no water damage trace, the first consideration of fault is pressed parts.

Step 4. Indeed, we can see the IC be pressed under the microscope , of course, do not first think that WiFi itself under pressure, sometimes the next filter will also suffer pressure. The following picture 10-4-1 is pressed IC fl_cell_rf with false welding, also with minor cracks. picture 10-4-3



Step 5. Take care to remove the IC and the small inductance. Losing inductance will also cause weak WiFi signal, of course, it is also possible to solder jumper wire to solve this kind of situation.

Step 6. Reinstalling IC fl_cell_rf to test WiFi signal, the problem is successfully solved now!

Tips: More cell phone repair skills and questions you need to consult, The VIP Pro Shop Team will be glad to help you.

Comments

Post a Comment

Popular posts from this blog

My iPhone Got Wet! How To Fix iPhone Water Damage?

Image
 Water damage tends to worsen with time, and it is among the more challenging DIY repairs to undertake, so this guide covers the basic iPhone repair of water damage.  1. Remove iPhone from the water and Turn it off Remove your iPhone from the water as soon as safely possible. Minimize the length of time the iPhone and water are in contact to minimize corrosion. If your phone is still on when removed from the water, attempt to turn it off. If it's off, do not attempt to turn it on. 2. Check External Ports Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a  Anti Static Brush , or replaced if cleaning is not practical. Pay special attention to cable ends, battery contacts, connectors, pins, and fuses, as these parts are prone to corrosion and can easily cause the phone to malfunction. Test all the buttons and features (such as the mic...
Read more

2021 Latest MagicAWRT Adapter Restore Tool for Apple Watch

Image
 Here we have the latest MagicAWRT adapter Apple Watch restore tool in 2021, and MagicAWRT offers its complete solutions to fix many apple watch problems. MagicAWRT Adapter is intended for solving service problems with Apple Watch S0/SE/S1/S2/S3/S4/S5/S6 (38 mm / 42 mm / 40 mm / 44 mm). It can solve problems such as white apples, exclamation points, restarts, stuck on screens, poor touch, ID lock, etc. It also can fix related issues that are caused by  Apple Watch glass digitizer touch replacement. Apple Watch Firmware for MagicAWRT Adapter Restore Tool will not be provided, and the customer needs to download themselves. 1. Using MagicAWRT Adapter to reset Apple Watch Data with or without Backup MagicAWRT Recovery Adapter Restore Tool is the best iOS data restore software in the market because of its ease of use and attractive user interface. Most Apple Watch users data losses are due to accidents, failed jailbreaks, hardware and software failures, factory resets, and theft....
Read more

How To Solve iPhone X Voltage Jumping Issue

Image
Today, We getting the iPhone X main board to test, we observe the current value repeatedly jumps between 0mA and 50mA on DC power supply , and it is different from the normal booting current. Next, test whether the power supply of every circuit is normal. PP_VDD_MAIN is measured 4.2V; PP_VDD_BOOST measured is 4.2V. PP1V8-ALWAYS is 1.8V, all the values are normal. But when testing PP1V1_S2, PP0V8_SOC_FIXED_S1, PP1V8_S2 and other circuit voltage that output by power chip U2700 voltage are jumping constantly. According to previous experience, voltage jump is usually caused by a power supply circuit of U2700 output. Measured with digital multimeter , there is no short circuit was found for the dipole value of all power supply to ground. We repaired iPhone 7P before and know that if crystal oscillator is false welding can also cause voltage jumping, And if iPhone CPU power supply is abnormal also can cause voltage jumping. Check the crystal oscillator we find no problem, then check th...
Read more