Why Photos Cannot be Saved on iPhone 6 - Fix it here!

"The iPhone 6 can't save photos,but sometimes it's normal, who could help me? How to solve this problem.", Fortunately, Today we have summed up some of the conveniences that are good ways to solve the trouble. 

we start disassembling to inspect what is the fault, the iPhone 6 motherboard has never been repaired, but the screw column is damaged, as shown in picture 12-1-1.



This screwdriver has a flashing light on the back of the camera. According to our repair experience, it is known that photos cannot be saved should be the iPhone flash IC problem. Will it be caused by screwdriver column? So after measuring the camera, the EN signal was found to be in a normal state, and would it be a semi - connected state?

After scraping, it is found that this line is nearly disconnected. Is it the problem here? The photo is really not saved after installing to test. Connect the line, the fault finally comes out.

Next, removing the flash IC off and cleaning the glue of the weld plate, then we start to measure the resistance, he E2 pin of the flash lamp is found to have no resistance. This is the I2C bus that connects the iPhone 6 CPU with the rear camera and the flash IC. The details are shown in WUXINJI schematic diagram. 

Picture 12-1-2

Picture 12-3

Scraping the lead to get rid of the possibility of broken line. Picture 12-1-4


The camera can get the resistance and get the exclusion of CPU false welding, it should be disconnected line problem in the plate. The solution is to connect jumper wire from the E2 pin of the flash IC to the rear camera socket FL2329. 


After welding the jumper wire, the flashing light E2 has a resistance value, install the flash lamp IC back, fault is solved now!



Tips: If you need more information and professional repair skilled, you want to consult, please check here. We'll give you a free answer. 

Comments

Post a Comment

Popular posts from this blog

My iPhone Got Wet! How To Fix iPhone Water Damage?

Image
 Water damage tends to worsen with time, and it is among the more challenging DIY repairs to undertake, so this guide covers the basic iPhone repair of water damage.  1. Remove iPhone from the water and Turn it off Remove your iPhone from the water as soon as safely possible. Minimize the length of time the iPhone and water are in contact to minimize corrosion. If your phone is still on when removed from the water, attempt to turn it off. If it's off, do not attempt to turn it on. 2. Check External Ports Check any external ports (charging port, headphone jack, SIM card slot, etc.) for corrosion as well. These may have to be cleaned out with alcohol and a  Anti Static Brush , or replaced if cleaning is not practical. Pay special attention to cable ends, battery contacts, connectors, pins, and fuses, as these parts are prone to corrosion and can easily cause the phone to malfunction. Test all the buttons and features (such as the mic...
Read more

2021 Latest MagicAWRT Adapter Restore Tool for Apple Watch

Image
 Here we have the latest MagicAWRT adapter Apple Watch restore tool in 2021, and MagicAWRT offers its complete solutions to fix many apple watch problems. MagicAWRT Adapter is intended for solving service problems with Apple Watch S0/SE/S1/S2/S3/S4/S5/S6 (38 mm / 42 mm / 40 mm / 44 mm). It can solve problems such as white apples, exclamation points, restarts, stuck on screens, poor touch, ID lock, etc. It also can fix related issues that are caused by  Apple Watch glass digitizer touch replacement. Apple Watch Firmware for MagicAWRT Adapter Restore Tool will not be provided, and the customer needs to download themselves. 1. Using MagicAWRT Adapter to reset Apple Watch Data with or without Backup MagicAWRT Recovery Adapter Restore Tool is the best iOS data restore software in the market because of its ease of use and attractive user interface. Most Apple Watch users data losses are due to accidents, failed jailbreaks, hardware and software failures, factory resets, and theft....
Read more

How To Solve iPhone X Voltage Jumping Issue

Image
Today, We getting the iPhone X main board to test, we observe the current value repeatedly jumps between 0mA and 50mA on DC power supply , and it is different from the normal booting current. Next, test whether the power supply of every circuit is normal. PP_VDD_MAIN is measured 4.2V; PP_VDD_BOOST measured is 4.2V. PP1V8-ALWAYS is 1.8V, all the values are normal. But when testing PP1V1_S2, PP0V8_SOC_FIXED_S1, PP1V8_S2 and other circuit voltage that output by power chip U2700 voltage are jumping constantly. According to previous experience, voltage jump is usually caused by a power supply circuit of U2700 output. Measured with digital multimeter , there is no short circuit was found for the dipole value of all power supply to ground. We repaired iPhone 7P before and know that if crystal oscillator is false welding can also cause voltage jumping, And if iPhone CPU power supply is abnormal also can cause voltage jumping. Check the crystal oscillator we find no problem, then check th...
Read more